#Install sonarr raspberry pi 4 password

Save the file with CTRL+X, then ‘Y’ and ‘Enter’. nfs/Movies) then simply add the same line under the first and replace the folder name. Make sure to use the correct IP address of your NAS and to correct the folder locations and/or name if you chose something different.

Copy and paste the following line at the bottomġ92.168.0.50:/nfs/TVShows /home/pi/TVShows nfs nouser,atime,auto,rw,dev,exec,suid 0 0.

Open the fstab file in the nano text editor by typing the following.

Feel free, however, to use a different location or name. To keep things easy I chose /home/pi/ as the directory and the same folder name as on your NAS. Create this folder with the following line

Now we need to create a folder on your Raspberry Pi that will be connected with the TVShows folder on your NAS.

If you don’t know what this means, check out the previous part of this guide.

Log into your Raspberry Pi (SSH into it).

Another assumption is that the folder on your NAS that should be shared with your Raspberry Pi is named ‘TVShows’ and is located in your M圜loud’s root folder. Obviously, you need to replace that with the correct one.

For demonstration purposes I will use the following as the IP address of your NAS: 192.168.0.50. If you have a different device, then search for instructions on Google.Īlright, let’s get to it. Remember that this is an example for the M圜loud NAS from Western Digital. Save the changes with CTRL + X, then hit ‘Y’ and ‘Enter’. If your router’s IP is 192.168.1.0, for example, then replace the third number with ‘1’. Also, replace the IP address (192.168.0.0) with your network’s IP. Replace SHAREDFOLDER with an existing folder on your M圜loud that you want to be shared (e.g.

Once logged in, open the exports file by typing the followingĪdd the following line at the bottom of the text editor /nfs/SHAREDFOLDER 192.168.0.0/24(rw,subtree_check,secure).

Don’t do anything you don’t understand here as this could deal serious damage to your NAS.

#Install sonarr raspberry pi 4 password

Now, type in the password you wrote down earlier. Ssh the last part with your server’s IP, which you can find in Settings > Network. In your terminal or command line window, type in What? Don’t panic, it’s actually quite easy.

Open up your terminal / command line on your computer and SSH into M圜loud.

Under ‘Network services’, switch SSH to On and write down the username and password in the pop-up window.

Go to Settings and select Network in the left sidebar menu.

Since I mentioned the WD M圜loud server before, I will go through the process based on that model as an example. Covering all popular NAS servers would be beyond the scope of this guide.

How do you do that? Well, that depends on the media server.